Vivitar ViviCam 8300s - Manual (Page 76)

Digital Camera >>
EN-76
9. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to
print with the
W/X butons.
Select the printing number (up to 99)
with the
S
/T buttons.
After selecting the desired image and
printing number, press the SET button
to confirm.
10.Select [Exit] with the S
/T buttons, and
press the SET button.
11.Select [Print] with the S
/T buttons, and
press the SET button to start printing.
12.The printing starts and the figure shown
on the right hand side appears.
The [Complete] screen will be displayed
temporarily, reminding you that the
printing procedure is finished.
If a print error is detected, the [Print Error]
screen will be displayed.
Select Page
Select Item Adjust
Adjust
Adjust
Adjust
Printing
The image printing may be failed if the power to the ViviCam 8300s is
accidentally cut off. We recommend that you use the AC power
adapter when connecting the ViviCam 8300s to the printer.