Vivitar ViviCam 8300s - Manual (Page 53)

User’s Manual >>
EN-53
Protecting Images
You may protect an image from accidental deletion, or erasure.
Protecting Images
1. Slide the mode switch to [ ].
2. Select the image that you want to protect
with the W
/X buttons.
3. Press the MENU button.
The playback menu is displayed.
4. Select [Protect] with the S /T buttons,
and press the SET button.
5. Select [Single] or [All] with the S
/T
buttons, and press the SET button.
6. Select [Set] with the S
/T buttons, and
press the SET button.
Protection is applied to the image and the
ViviCam 8300s returns to the playback mode.
The protect icon [ ] is displayed with
protected images. When [All] has
been selected, [
] is displayed with
all images.
Canceling Protection
To cancel protection for only one image, display the image that you want to
remove the image protection.
1. Select [Protect] with the
S
/T buttons from the playback menu, and
press the SET button.
2. Select [Single] or [All] with the S
/T buttons, and press the SET button.
3. Select [Cancel Protect] with the S
/T buttons, and press the SET button.
The image is no longer protected and the ViviCam 8300s returns to playback mode.