VTech ia5870 - Manual (Page 12)

www.vtechphones.com 9
G
ett
in
g s
ta
rte
d
Installation
Set handset date and time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming call.
If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press or until DATE/TIME is displayed Press SELECT.
• The month is flashing. Press or until the screen displays the correct month Press SELECT
• The day is flashing. Press or until the screen displays the correct day Press SELECT.
• The hour is flashing. Press or until the screen displays the correct hour Press SELECT.
• The minute is flashing. Press or until the screen displays the correct minute Press SELECT.
• AM or PM is flashing. Press or to choose between AM or PM. Press SELECT.
Handset ringer style
You can select from four different handset ringer styles, or turn the ringer off
1 With the handset in idle (off) mode, press PROG
2 Press or until the screen displays RINGER: and current setting
3 Press SELECT The current setting blinks, and you will hear a sample of the ring
4 Press or to select RINGER: 1, 2, 3, 4 or OFF You will hear a sample of each ring tone
5 Press SELECT to choose the displayed ringer setting
Set ringer volume
You can select from two different handset ringer volume, or turn the ringer off
1 Begin with the handset in idle (off) mode
2 Press and hold or
until the screen displays OFF LOW HIGH
3 The current setting blinks, and you will hear a sample of the ring volume
4 Press or
to select ringer volume: OFF LOW HIGH You will hear a sample of each ring tone
5 Press SELECT to choose the displayed ringer setting
• In the event the
battery loses all
of its power or is
removed, the time
setting will be lost