Care and maintenance – Vinotemp VT48TEDS2Z User Manual
Page 9
How to use the buttons on the Display Panel:
You can set the temperature by pushing the control buttons.
There are two buttons on the panel “ ” and “ ” to adjust the
temperature by 1°F increments from 54-66°F. You can turn the
interior light on or off by pressing the “light” button.
CARE AND MAINTENANCE
Cleaning Your Wine Cellar
z
Unplug the wine cellar and remove the bottles.
z
Wash the inside with a warm water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to a
quart of water.
z
The outside of the wine cellar should be cleaned with mild
detergent and warm water.
z
Unscrew the water box at the bottom, and wash it.
Moving Your Wine Cellar
z
Remove all the bottles.
z
Securely tape down all loose items inside your wine cellar.
z
Turn the leveling legs up to the base to avoid damage.
z
Tape the door shut.
z
Be sure the wine cellar stays in the upright position during
transportation.
9