Problems with your wine cellar – Vinotemp VT48TEDS2Z User Manual
Page 10
10
PROBLEMS WITH YOUR WINE CELLAR
You can easily solve many common wine cellar problems, saving you
the cost of a possible service call. Try the suggestions below to see if
you can solve the problem before contacting Vinotemp at
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE
CAUSE
Wine cellar does
not operate
•
Not plugged in.
•
Using wrong voltage
•
The circuit breaker tripped or there is a blown fuse.
Wine cellar is not
cold enough
•
Check the temperature control setting; external
environment may require a higher setting.
•
The door is opened too often.
•
The door is not closed completely.
•
The door seal does not seal properly.
•
The wine cellar does not have the correct clearances
to operate efficiently, safely and correctly.
Light does not
work
•
Call the service center.
Vibrations
•
Check to assure that the wine cellar is level.
Wine cellar seems
to make too much
noise
•
The wine cellar is not level.
•
Check the fans inside and at the back of the unit.
Door will not close
properly
•
The wine cellar is not level.
•
The doors were not properly installed.
•
The seal is weak.
•
The shelves are out of position.
Temperature LED
display is blank
•
Main control board does not work.
•
The Power Control Board is not functioning.
•
There is some problem with the plug (no power
supply).
Temperature LED
display error
•
Display has suffered too much wear and tear.
•
Temperature sensor has been cut off.
Buttons are not
functional
•
Temperature controller panel is damaged.