VOX Amplification USA AGA70 User Manual

Page 9

16. [ALL MUTE] switch

Set this switch to On to mute the sound output from the amplifier.

NOTE:

This switch does not mute the sound output from the [DI OUT] or [TUNER OUT] connectors.

HINT:

Connect an optional VFS2 dual foot switch to the amplifier to control All Mute on and off with
your foot.

17. [ANTI-FEEDBACK] control

This control enables you to reduce the amount of feedback that is caused when the output from the
amplifier is picked up via a guitar or microphone.
Set the control knob so that the amount of feedback will be minimum.
Turning the control knob clockwise will move the cut point to a higher frequency range. Turning the
control knob counter-clockwise all the way will turn off the anti-feedback effect.
Turn this control off if you hear no feedback.

18. [POWER] indicator

The indicator lights up when the power to the unit is turned on. The [POWER] switch is located on the
rear panel.

This manual is related to the following products:

AGA150