Changing the digital security code – Uniden XS1215 +1 User Manual

Page 33

Changing the Digital Security Code

To protect you against misbilled calls which might result from your phone being activated by other

equipment, the cordless phone provides

(which electrically locks your phone when each

handset is in the cradle) and

digital security which automatically selects one of over

262,000 digital security codes for each handset and the main base.

If the handset battery pack is completely discharged or the battery pack is removed, the digital security

code will be lost. If this happens, a new security code is set automatically the next time the battery pack

is charged. In the rare situation that you suspect another cordless telephone is using the same security

code, you can change

the code.

1) Remove the handset from the cradle. Press and hold the

key on the main base.

2) While holding the

key, place the handset in the main base, and leave the handset in

the main base for more than three seconds. A new random security code is set.

1) Remove the handset from the cradle. Press and hold the

key on the main base.

2) While holding the

key, place the handset in the main base, and leave the handset in

the main base for more than three seconds.

3) Remove the handset from the main base. Then place the second handset in the main base and

wait for more than three seconds. No need to hold the

key this time.

4) Press the

key on one handset. Once you make sure

appears on the display, press

the

key. Then, try with the second handset. If each handset displays

, a new security

codes set. Otherwise, return to step 1 and try again.

AutoSecur

Random Cod

find handset

talk/flash

end

For XS1215;

For XS1215+1;

Talk

[32]

CHANGING

THE

DIGIT

SECURITY

CODE

This manual is related to the following products:

XS1215