Uniden XS1210 User Manual

Page 8

3. If you need the phone to pause during the dialing sequence,

press the

key to insert a two-second delay

between the numbers. You can enter multiple pauses to

increase the delay. Each pause counts as a digit.

4. Press the

key again.

5. To store this number in the RocketDial memory, press the

key. You will hear a confirmation tone

indicating that the number has been stored.

6. To store this number as one of the ten speed dial numbers,

enter a digit from to . If there is already a number in that

speed dial setting, it will overwrite the previously stored

number without warning. You will hear a confirmation tone

indicating that the number has been stored.

1. When the phone is in standby mode, press the

key, and listen for a dial tone.

2. Press the

key and enter the speed dial entry

9) that has the stored

number you want to dial. (If you enter a digit that does not contain a stored

number, the handset will beep rapidly, and the phone will not dial.)

The speed dial memory is not limited to phone numbers. You can store any number

(up to 20 digits) that you need to enter once your call connects. This is referred to as

Chain Dialing.

For example, you can save your bank account number to speed dial memory. When

you call your bank's telephone teller service and are prompted to enter your account

number, simply press the

key and the speed dial number where you stored

your account number.

1. With the phone in standby mode, press the

key twice.

2. Press the number of the speed dial entry or the

key. A tone

indicates that the stored number is erased from memory.

redial/pause

memory

Rocketdial/call wait

NOTE:

talk

memory

Rocketdial/call wait

When storing numbers into memory, if the handset is idle (i.e., no key is

pressed) for more than 30 seconds, it will beep rapidly, and the phone

will return to standby mode.

(0-

Dialing a Speed Dial Number

Chain Dialing

Erasing a Stored Number from Memory

Making Calls With Rocketdial/call wait

When the phone is in the standby mode, simply press

The

number stored in the RocketDial memory location is instantly dialed.

Rocketdial/call wait.

[7]