Making and receiving calls – Uniden XS1210 User Manual
Page 6

Making and Receiving Calls
Making a call
Receiving a call
Hanging up
Redialing the last dialed number
Ringer tone and volume
Earpiece volume
Temporarily Mute Ringer
Travelling Out-of-Range
Selecting a Different Channel
1. Remove the handset from the base.
2. Press the
key. The
LED flashes and turns on.
3. Listen for the dial tone.
4. Dial the number.
If the handset is in the base, simply remove the handset from the base. AutoTalk will
automatically answer the call.
If the handset is off the base, press the
key or any number key.
Press the
key or return the handset to the base.
1. Remove the handset from the base.
2. Press the
key. The
LED flashes and turns on.
3. Listen for the dial tone.
4. Press the
key.
If a call waiting tone sounds while you are on a call:
Australia:
Press
to switch
between callers.
New Zealand: Press
to switch between callers.
When the phone is in standby mode, press the
key repeatedly to listen to the
four ringer tones and volume combinations. The last ringer tone heard will be
selected as the phone’s ring tone setting.
The handset earpiece volume settings (low, medium and high) can only be adjusted
during a call. Use the
key to scroll through the volume levels and select the
one that works best for you. When you hang up, the phone keeps the volume
setting.
If the handset is off the base, simply press the
key to temporarily mute the
incoming ring. The ringer will sound with the next incoming call.
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base, your call will terminate within one
minute.
If you encounter interference while using your phone, you can manually change the
phone’s channel for clear operation. This function works only when the phone is in
use. Press the
key. The
LED flashes, indicating the phone is
changing to another channel.
talk
talk/batt low
talk
end
talk
talk/batt low
redial/pause
Rocketdial/call wait
flash
NOTE:
vol/
vol/
end
channel
talk/batt low
You must subscribe to call waiting through your telephone company.
Flash and Call Waiting
Adjusting the Ringer and Earpiece Volume
[5]