Uniden DGMax DGA940 - Manual (Page 25)

The pause button count
as one digit. Pressing
redial/p more than
once increases the length
of pause between numbers.
Accidentally pressing memory
key
a, b, c, or d after
pressing mem., may result
in unintentional dialing.
22 22
1. Remove the handset from the base.
2. Press mem . The talk/batt low LED blinks.
3. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
redial/p to insert a pause.
4. Press mem again.
5. Enter the memory location (01-20) on the
keypad or press memory key
a, b, c, or d . A tone indicates that
the number is stored.
▼ Using the memory location features
1. Press talk.
2. Press mem.
3. Enter the memory location (01-20). The number automatically dials.
▼ One touch memory dialing
Press memory key
a, b, c,
or
d
. The number automatically dials.
1. Remove the handset from the base unit.
2. Press mem button twice.
3. Press the memory location (01-20) or memory a, b, c, or d to be erased.
A tone indicates that the stored number is erased from memory.
ERASING A STORED NUMBER FROM MEMORY
DIALING A NUMBER IN MEMORY
a
b
c
d
talk
mem
redial/p
STORING A PHONE NUMBER IN MEMORY