Uniden DGMax DGA940 - Manual (Page 22)

Your phone may be used with an optional
headset, the Uniden HS910 or Uniden CTA 630.
To use this feature, simply plug the headset
plug into the headset jack. Your phone is
ready for hands-free conversations.
To prevent other parties from making unauthorised calls on your phone line, a
digital code was added to the DGA940. Your phone’s handset and base share this
code. This code is randomly set each time you place the handset in the base. If
the phone experiences a power failure, you must reset the digital security code by
placing the handset on the base.
▼ To reset the digital security code
1. Restore power to the base.
2. Place the handset on the base.
status LED must light up.
The digital security code is reset.
AUTOMATIC DIGITAL CODE SECURITY
If you are using an optional headset, you must still use
the handset keypad for phone operations.
HEADSET INSTALLATION
19
Use only the Uniden HS910
headset or Uniden CTA 630
headset.
Keep the headset wire away
from handset and
base antennas.
INST
ALLA
TION & ADJUSTING