Resetting and registering handsets, Registering a handset – Uniden PS-0035 User Manual
Page 23
2
If you use pulse dialing and you need to send DTMF tones during a call (if
you're using an automated response system, for example), press to
temporarily switch to tone dialing. When the call ends, the phone
automatically returns to pulse dialing mode.
resetting and registering Handsets
If you are having trouble with a handset or if you want to replace one, you
need to clear the registration information from the base and the handset:
Do you have the base the handset is registered to?
Yes
No
Press and hold
FLASH/ExIT
and
PoUND (#)
until
the System Reset menu appears (about 5
seconds).
Select Deregister HS. The display lists all
registered handsets.
Select the handset you want to reset.
When the phone asks you to confirm, select
Yes. The handset clears its information from
the base and deletes it own link to the base.
1.
2.
3.
4.
Press and hold
FLASH/
ExIT
and
PoUND (#)
until
the System Reset menu
appears (about 5 seconds).
Select Base Unavailable.
When the phone asks you
to confirm, select Yes. The
handset deletes its own link
without contacting the base.
1.
2.
3.
When you reset a handset (or if you purchase a new one), that handset
displays a Handset Not Registered message. If you see this message on
a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes
No
Place the handset in
the base. The display
should say Handset
Registering.
Disconnect the base AC adapter.
Press and hold
FIND
while you reconnect the adapter.
On the handset, press and hold
PoUND (#)
until the
display says Handset Registering (about 2 seconds).
1.
2.
3.
In about 0 seconds, the display should say Registration Complete. Pick
up the handset and press
TaLk
. Make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
the display says Registration Failed
-
-
Making sure the handset is fully
charged, then trying again.
To register a handset to a different base, see the section "expanding
Your phone" in the user's guide for the other base.