Uniden BC 278CLT - Manual (Page 16)

4. Press E to complete the entry. The channel .
digits stop flashing.
Deleting a Scanner Frequency
If you want to delete a stored frequency, follow these steps:
Example: Delete the frequency in Channel 12.
1. Press MANUAL to stop scanning.
2. To select the channel (12),
press 1, then 2 on the
numeric keypad. Then press
MANUAL again.
OR
Press ▼/▲ until channel
12 appears in the display.
3. Press 0, then E to complete the entry.
The channel digits stop flashing.
13
BC278clt.qxd 3/8/00 7:34 PM Page 13