Call transfer room monitor intercom, Mute, Again – Uniden DS72 User Manual
Page 24: Intercom from the base unit 1. press, On the base unit. (if there is no answer press, Again to disconnect). 2. press, On the base unit. -or- press, On the handset
22
22
To use the mute feature during a
conversation, press
mute
. The other party will
not be able to hear you although you can hear
them. To disable the mute feature, press
mute
again.
▼
Intercom from the Base Unit
1. Press
int
on the base unit. (If there is no answer press
int
again to disconnect).
2. Press
int
on the handset to answer the intercom.
3. Speak into the mouthpiece.
4. To turn off the intercom, press
int
on the base unit.
-OR-
Press
int
on the handset.
You may use the DS72 handset to monitor activity near the base unit without
anyone present at the base unit.
To turn Room Monitoring on:
1. Press
int
on the handset.
2. There is a beep sound from the base unit then automatically two-way
communications are now set up between the base unit and the handset.
3. To turn monitoring off, press
int
on the handset.
▼
Transferring a call from the Handset to the Base Unit
When a phone call is answered at the handset, you can transfer the call to the
base unit.
1. During a call, press
int
on the handset, the call is placed on hold automatically and
the base unit is paged. (If there is no answer press
int
again to return to the call).
2. At the base unit, press
int
to answer the page. An intercom link is now established
between the handset and the base unit. Speak into the microphone.
CALL TRANSFER
ROOM MONITOR
INTERCOM
h
flash
redial/p
int
mem
hold
mute
1
2
abc
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
*
0
#
3
def
vol
MUTE