Uniden DS72 - Manual (Page 13)

6. Align the mounting slots on the
base with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
7. On the base, pull the handset retainer out
of the slot. Rotate clockwise 180°.
8. Flip the retainer from front to back.
Slide it back into the slot so that the lip
of the retainer is (arrow on the retainer
must be pointing down).
The retainer holds the handset in place.
▼ Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to
the wall. Before doing this, consider the following:
●
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting the screws into the
wall.
●
Mount your phone near a working phone jack to avoid excessive
cord lengths
●
Make sure the wall material is capable of supporting the weight of the base and
the handset.
11
Before you plug the other
end of the telephone cord
into the modular jack on the
wall, charge the battery (See
CHARGING THE BATTERY
PACK, page 15).
INST
ALLA
TION & ADJUSTING