Priority channel – Uniden UH-042XR User Manual

Page 13

PRIORITY CHANNEL

The Priority Channel feature allows user to monitor one of 40 channels in the
UH-042XR

, monitoring it every 1.5secs during Group Scanning.

Choosing a Priority Channel

The starting channel, when Group Scanning is initiated, is always the Priority
Channel. To change the priority channel setting while scanning, (eg. PRI Channel
is CH17 (476.825 MHz))

a. press [▲], to select a higher channel

(scanning pauses)

b. press [▼], to select a lower channel

Programming Scan Channels

1. Select which Scanning Mode you wish

to use on the channel

OS or GS Mode

Note:

OS is indicated by the absence of the GS icon

2. Select the channel you want to store by

pressing [▲] or [▼]

3. Pressing

[MEM]

momentarily to store.

MEM icon appears and beep sounds are
heard.

4. To remove the channel from Memory, press

[MEM]

momentarily. MEM icon disappears and

beep sounds are heard.

os/gs

mem

bcl

ctcss

vox

dup

scan