Uniden BC250D - Manual (Page 79)

75
Disconnect Tone Detect Option (End Code)
When this function is disabled, the radio looks for squelch
before returning to the Control Channel instead of waiting for
the Disconnect Tone. Only in rare instances will you need to
adjust the default settings.
The condition to return to Control Channels depends on
whether the signal is present or not.
To set this function to ON / OFF, select 2:SCAN OPTION
/ 2:TRUNK - select bank number - / 0:END CODE.
Select 1:DETECT or 2:IGNORE.
BC250D 11/6/2 11:37 AM Page 75