Uniden BC355C - Manual (Page 34)

If You Want to do This - Here’s How -
Resume scanning
(Cont.)
Any bank key - If you press a different
bank key, you will start scanning in
that new bank and the bank label will
resume flashing.
L/O key - Press this key to lock out
this frequency and step to the next
frequency
•
•
Keep scanning after the
BCC has stopped on
an active channel If the BCC stops on an active
channel that you do not want to
monitor but you do not want to lock
out, press the bank key or the UP key.
You will scan to the next frequency.
Select a different bank
to scan Use one of the following two
methods:
Use the UP key to move through
frequencies and banks.
Deactivate the bank(s) you do
not want to listen to, leaving only
the desired band active.
.
.