beautypg.com

Storing search frequencies, Warning, Auto storing – Uniden UBC780XLT User Manual

Page 38: Error, Store end

background image

28

Storing Search Frequencies

You can quickly store any frequency you find during Search.

Caution: You must select the channel in which you will store the frequency before entering

the search mode. Otherwise, you may erase a stored frequency that you want
to keep.

1. During search, press

HOLD/

when the scanner

stops at the frequency you want to store.

2. Press

E

to store the frequency in the channel you selected.

Note: • If the frequency you want to store exists already,

WARNING

appears on the display

with a beep. (See Duplicate Frequency Alert on page 19.)

• After storing the frequency, it moves to the manual mode.

3. To store another frequency, select another channel for the new frequency by pressing

MAN

or

HOLD/

or

LIMIT/

.

4. Repeat steps 1 and 2 after starting search for all the Search frequencies you want

to store.

Auto Storing

The scanner automatically stores searched frequencies if its auto store feature is activated.

To make use of this feature, set a search range first (see page 26), then enter into the menu mode.

1. Press

MENU

.

2. Press

or

to select SEARCH EVENT and then press

E

.

3. Press

or

to select AUTO STORE and then press

E

.

4. Set to ON using

,

or VFO and pressing

E

. All

bank numbers start flashing and AUTO is lit on
the display.

5. Select the bank numbers you want to use with the

keypad. The selected bank numbers stop flashing.

Note: If the selected bank has no free channels to store,

ERROR

will appear on the display with a beep.

6. Press

SRCH

to start auto storing.The AUTO icon on the display

begins to flash. Audio is muted during the storing process.

7. After the search has gone through the search

range, press

MAN

or

MENU

to stop this feature.

STORE END

appears in the display. You

may want to let it run through the search range
again because during the first pass there
may not be any transmissions at that
particular time.

Remember! You can also use the VFO control for scrolling. Also instead of pressing
E, you can press the VFO/SELECT control or press the SELECT/MUTE key.