UTStarcom Handset - Manual (Page 44)

Settings
36
8. SETTINGS
8.1 Security
To prevent others from using the phone without
permission and allow access to security features only
after inputting a lock code (password):
1. Press [Menu] , .
The default Lock Code is “0000.”
8.1.1 Security Mode
To set the security mode:
1. Press [Menu], , then enter the lock code (password).
2. Press .
Select “Off”, “Always”,” Now” or “Power On” and then
- Off: Normal phone mode.
- Always: Phone immediately locks.
- Now: Phone immediately locks. To unlock the phone, input the lock
code via menu entry.
- Power on: Phone immediately locks each time it is powered on. To
unlock the phone, input the lock code via menu entry.
3. Press [Select].
8.1.2 Change PWD
To change your 4-digit lock code (password):
1. Press [Menu], , then enter the lock code.