14 electronic control quick guide – U-Line 2115WCOL2 User Manual
Page 18
18
2115WC and 2115WCOL2, 2175WC and 2175WCOL2
NOTE: 38°F is an example; the display will vary with actual set-point. IMPORTANT: Factory recommended set-point is
38°F for refrigerators and beverage centers, and 50°F for wine coolers.
14 Electronic Control Quick Guide
All Models
Task
Touch
Touch
Display
Comment
Turn ON/OFF
Hold 10 seconds
Release when °F flashes.
or
Adjust
Temperature
or
Touch and release
or
Touch to change temperature
°F flashes after first touch,
set-point saved after 5
seconds of inactivity and °F
stops flashing.*
View Actual
Temperature
Hold 5 seconds
Release when °F flashes.
For Wine Coolers, see Use
and Care Manual.
Change °F-°C
Hold
or
Repeat to switch back.
Blackout
Mode
Hold 10 seconds
Display (and cabinet light) not
operable in Blackout Mode.
Hold light for 10 seconds to
exit.
* Drawer Wine Cooler: Initially, top bar will flash to set to zone. After five seconds of inactivity (or touching light button), the bottom
zone (bottom bar on F flashing) can be adjusted. After five seconds of inactivity, set-point will be stored in unit.
Glass Door Models
Task
Touch
Touch
Display
Comment
Cabinet Light
Light normally goes on/off
with door opening. Pressing
light button will turn
interior light on for 4 hours,
then it will turn off.
Display Off
Mode
Hold
Display off when door is
closed (unless cabinet light is
switched on). Repeat to
switch back.
All Ice Makers
Task
Touch
Touch
Display
Comment
Ice Maker Off
Mode
Hold
Repeat to switch back
Clear Ice & Clear Combo Only
Task
Touch
Touch
Display
Comment
Clean Cycle
Hold
Will automatically return to
ice production when clean
cycle is complete.
Ice Thickness
Adjustment
Hold
Use warmer/colder to scroll.
Temporary
Shutdown
(Office Mode)
Hold
Ice maker will automatically
turn back on in three hours.