U-Line 2115WCOL2 - Manual (Page 14)

14 2115WC and 2115WCOL2, 2175WC and 2175WCOL2
Door Reversal (Black Models Only)
Figure 17
All U-Line black units may be left- or right-hand opening.
Stainless steel unit doors cannot be reversed. The doors
are easily reversed by moving the hinge hardware to the
opposite side. The top hinge hardware will be used on the
bottom of the other side and the bottom hinge hardware
will be used on the top of the other side (Figure 17).
To reverse the door:
Figure 18
1. Remove top hinge screw pin (Figure 18, 1) from door
using a Phillips screwdriver. Remove door by tilting
forward and lifting off bottom hinge pin.
Figure 19
2. Remove metal hinge screw plugs (three each, top and
bottom) (Figure 19, 1) from new hinge location. Do
not discard.
3. Remove top hinge (three screws) (Figure 18, 2) and
reinstall hinge screw pin (Figure 18, 1).
Figure 20
4. Install the removed top hinge mount on opposite side
BOTTOM (Figure 20).
Figure 21
ULIN_0015_A
1
2
ULIN_0003_A
1
ULIN_0002_A
1
ULIN_0005_A
1
ULIN_0004_A