Getting up and running, Install the battery pack – Uniden UDC-7M User Manual
Page 4
iii
English
GETTING UP AND RUNNING
Install the battery pack
1
Use the supplied charger to charge the battery pack.
h The CHARGE indicator lights red during charging.
h The CHARGE indicator will turn off when the battery pack is fully charged.
h Charging takes approximately 90 minutes.
2
Open the battery/card compartment cover, and insert the battery pack.
h The battery/card compartment cover is located on the side of the
camera.
h Press the on/off button to turn the camera on.
CHARGE indicator
Uniden logo
To power outlet
[o] mark
Socket
Battery pack
[o] mark
on/off button
Uniden logo