Uniden 2.4 - Manual (Page 54)

[ 5 2 ] E X P A N D I N G Y O U R P H O N E w w w . u n i d e n . c o m
3-Way Conferencing
The phone permits 3-way conversations between 2 handsets, and an outside line.
1) During a call, press talk/flash on another handset to initiate the 3-way conversation.
2) To remove either caller from your conversation, press end key on either handset.
The other handset will still be connected to the call.
Intercom/Call Transfer Feature
If you have one or more extra handsets, you can enjoy an intercom call between handsets.
Also, you can place an outside call on hold and transfer the call to another handset.
Intercom
1) Press hold/transfer/int'com in standby mode.
2) Select the handset you want to talk with from the
selection list within 30 seconds. To select the handset,
press ring/vol/
∧ or ring/vol/∨ and then press
select/
.
If you select Al l , all handsets will be paged.
An intercom tone sounds.
3) On the receiving handset, to answer the call, press talk/flash or hold/transfer/int'com.
If you turn AutoTalk on, pick up the handset from the cradle. If Anykey Answer is on,
press any number key,
* /tone/ ← or #/→.
4) To finish the intercom call, press end on either handset.
6 Q K P V G T E Q O
* C P F U G V
* C P F U G V
•If the party is busy or
out of range, the
handset returns to
standby mode.
•If any of the following
occurs while selecting
the other handset,
the operation will
be canceled.
- Press talk/flash
or speaker.
- Receive an outside/
intercom call or page.
•When the party does
not answer within one
minute, the operation
is canceled.
•Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
note