Uniden 2.4 - Manual (Page 18)

[ 1 6 ] G E T T I N G S T A R T E D w w w . u n i d e n . c o m
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter into the DC IN 9V jack.
2) Wrap the AC adapter cord inside the molded wiring
channel as shown.
3) Plug the AC adapter into a standard 120V AC
wall outlet.
4) Plug the telephone line cord into the TEL LINE jack.
Wrap the cord inside the molded wiring channel
as shown.
5) Plug the telephone line cord into the
telephone outlet.
6) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and down
until the phone is firmly seated.
DO NOT use an AC
outlet controlled by a
wall switch.
GETTING ST
ARTED