Expanding your phone, Connecting the charger – Uniden 2.4 User Manual

Page 51

E X P A N D I N G Y O U R P H O N E [ 4 9 ]

w w w . u n i d e n . c o m

Expanding Your Phone

4 Multi-Handset Expandability

Your phone supports up to 4 handsets
(including the handset(s) supplied with your
phone). You can now place a fully-featured
cordless handset anywhere AC power is
available to connect the handset charger.
Up to 2 handsets can be used for an outside
and/or intercom call.
For example, the phone permits 3-way
conferencing (2 handsets and an outside line).

IMPORTANT:
• If you purchase a DCX640 extra handset, please register the handset to the original/main

base before use. The DCX640 will not operate until it is registered.

• If you change a Global setting in one handset, you change that particular setting for all

registered handsets. All other settings (not included under Global Setup), must be set
separately through each handset.

Connecting the Charger

1) Connect the AC adapter to the DC IN 9V jack and to a

standard 120V AC wall outlet.

2) Set the charger on a desk or tabletop, and place the

handset in the charger with the keypad facing forward.
(See "B. Install the rechargeable battery pack into the
handset" on page 12).

•To use the DCX640,

•Save this manual for

detailed operation.

•All of the handsets

ring when a call
is received.

•Charge the handset

battery pack for at
least 15-20 hours
before using your new
cordless telephone for
the first time.

note

EXP

A
NDING Y

OUR

PHONE