Specifications – United States Stove Company 5700 User Manual
Page 5
-5-
SPECIFICATIONS
HEATING SPECIFICATIONS
1
BTU output will vary depending on the quality of fuel. Use PFI listed fuels for the best results.
2
Heating capacity will vary depending on floor plan layout of your home, degree of insulation, and the outside temperature.
3
Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best re-
sults.
DIMENSIONS
ELECTRICAL SPECIFICATIONS
FUEL CONSIDERATIONS
Your
Ashley Heritage Model 5700
stove
is designed to burn premium hardwood pellets that comply with Associa-
tion of Pellet Fuel Industries standards. (Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no
greater than 1.5”, not less than 8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt un-
der 300 parts per million). Pellets that are soft, contain excessive amounts of loose sawdust, have been, or are wet,
will result in reduced performance.
SAFETY AND EPA COMPLIANCE
Your
Ashley Heritage Model 5700
stove
has been safety tested and listed to ASTM E 1509, (UM) 84-HUD by
OMNI-Test Laboratories, Inc. Beaverton, Oregon, USA. It is also exempt from EPA Phase II requirements.
Heat Output
1
38,000
BTU/hr
Heating Capacity
2
800 – 2,000 sq ft
Fuel Burn Rate
3
1.5 – 4.7 lbs/hr
Burn Time (lowest setting)
24 hrs
Hopper Capacity
50 lbs
Height 38
3/4
in
Width 24
1/4
in
Depth 25
3/4
in
Weight (empty)
280 lbs
Electrical Rating
110-120 volts 60 HZ 3.0 amps
Watts (operational)
175 (approximately)
Watts (igniter running)
425 (approximately)