beautypg.com

Universal Remote Control (URS) Easy Clicker UR3L-SR4 User Manual

Page 9

background image

7

**Note : The FAV button is not programmable if you have a

Digital Cable Box made by Pace, Pioneer or
CISCO/SA.

STEP1 Press the [CBL] button to select the CBL mode.

STEP2 Press the [MACRO] button and [OK/SEL] button

simultaneously for 3 seconds. The [CBL] button will
turn on for 30 seconds.

STEP3 Enter the the 2, 3 or 4-digit code for the channel you

want programmed first (for example, 007) using the
Number Pad, then press the [STOP] button. Then
enter the code for the next channel (for example,
050), then press the [STOP] button. Repeat this
process for the third channel. The [CBL] button will
blink once for each channel entered.

STEP4 Press the [CH+] button to store the channels that

were selected. The [CBL] button will blink twice to
confirm the storage of commands.

To access the programmed channels, press the [MACRO]
button once. This will bring up the first channel. Press once
again and it will bring up the second channel. Press again
and it will bring up the third channel.

To erase the Macro programming and return to the original
function:

STEP1 Press the [CBL] button to select the CABLE mode.

STEP2 Press a [MACRO] button and the [OK/SEL] button

simultaneously for 3 seconds. The CBL device LED
will turn on for 30 seconds. The next step must be
performed while the LED is on.

STEP3 Press the [CH+] button to erase the functions stored

in the button. The CBL device LED will blink twice to
confirm that the memory button has been erased.