Uniden ATLANTIS 250 - Manual (Page 17)

Deleting a Channel from Memory
1 Select the channel to delete from
memory by pressing the s or t button.
2 Press the MEM button for two secons.
MEM disappears from the display.
Scanning
1 To begin scanning the programmed
channels, press the SCAN button. SCAN
and TRIPLE appear on the display.
2 To stop scanning, press the SCAN
button once more. SCAN and TRIPLE dis-
appear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
• When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press TRI button. TRIPLE disappears from the
display.
15
Atlantis 250CE.indd 15 30/8/07 4:04:14 PM