Uniden TITANIUM 24-148 User Manual

Page 56

A D D I T I O N A L I N F O R M AT I O N

[ 54 ]

SSyym

ptto

The answering system does
not work.

Messages are incomplete.

Af ter a power failure, the
outgoing message is deleted.
No sounds on the base unit
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another touch-
tone phone.

Severe noise inter ference.

If you still have a problem.

SSu

geessttiio

• Make sure the base unit is plugged in.
• Make sure that the answering system is turned on.
• Make sure that the message record time is not set to

(See page 42).

• The incoming messages may be too long. Remind callers to leave a

brief message.

• The memor y may be full. Delete some or all of the saved messages.
• Record your greeting again.

The preset message remains.

• Adjust the speaker volume on the base unit.

• Make sure you are using the correct PIN number.
• Make sure that the touch-tone phone yo u ´ re using can transmit the

tone for at least two seconds. If it cannot, you may have to use another
phone to access your message.

• Keep the handset away from microwave ovens, computers, remote

control toys, wireless microphones, alarm systems, intercoms, room
monitors, fluorescent lights and electrical appliances.

• Move to another location or turn of f the source of inter ference.
• Call our customer hotline at 1-800-297-1023

UC772EZ ENG(24-148) 10/9/01 15:28 Page 54