Baudot code, Ascii (optional), Selecting turbo lock – Ultratec PRO80TM User Manual
Page 56: About ascii, Changing ascii options
5 0 • U S I N G C O D E S
Selecting Turbo Lock
To make sure that you are using Turbo Code with a call, select Turbo
Lock:
1.
Press .
CODE < AUTOMATIC> is displayed.
2.
Press the
to change the option to
press .
TURBO LOCK
3.
Press the
to change the option to
. ** TURBO LOCK ON ** is displayed.
4.
Press
to exit the Options menu.
BAUDOT CODE
1.
Press .
CODE < AUTOMATIC> is displayed.
2.
Press the
to change the setting to
3.
Press . ** BAUDOT CODE ON ** is displayed briefly. Then,
the Baudot baud rate option is displayed.
4.
Press the
to select either <45> or <50>. Then, press
to save it.
Select <45> to use only 45.5 baud Baudot. Most Baudot TTYs use
this setting.
Select <50> to use only 50 baud Baudot. TTYs purchased in
Australia, New Zealand or South Africa use 50 baud.
5.
Press
to exit this menu.
ASCII (OPTIONAL)
About ASCII
ASCII stands for American Standard Code for Information Interchange.
Some TTYs and all computers in the United States and Canada use ASCII.
If your Superprint Pro80 has ASCII, you may need to change some
options.
Changing ASCII Options
1.
Press .
CODE < AUTOMATIC> is displayed.
2.
Press the
to change the setting to
3.
Press .
** ASCII CODE ON ** is displayed briefly. Then, the
first of the ASCII options is displayed.
4.
Press
to scroll through the options. These described in the next
section, “ASCII Options.”
5.
For each option, you can press the
to change the setting.
Then, press
to save it. The next option will be displayed.
6.
Press
to exit the ASCII Options at any time.
Esc
Enter
Spacebar
Enter
Spacebar
Options
Esc
Enter
Spacebar
Enter
Spacebar
Options
Esc
Enter
Spacebar
Enter
Spacebar
Options