Uniden DSS 7805WP - Manual (Page 7)

2. When REGISTRATION COMPLETE. is displayed; the handset
has been registered to the base. If REGISTRATION FAILED.
appears, please try these steps again.
6
ELITE8855
ELITE8855+1
Make sure there is no handset sitting in the
main base charger before starting.
From the base, press [menu/select] and select
System Setup menu.
Select Register Handset, and press
[menu/select].
On the handset, press and hold the [#] key until
the display reads HANDSET REGISTERING
and you hear a beep.
•
•
•
•
ELITE8815
ELITE8815+1
Make sure there is no handset sitting in the
main base charger before starting.
Press and hold the Registration button at the
underside of the base.
Keep pressing the Registration button until the
handset charge LED on main base starts to
blink.
On the handset, press and hold the [#] key until
the display reads HANDSET REGISTERING
and you hear a beep.
•
•
•
•