Uniden TRU 3485 - Manual (Page 24)

M E M O R Y D I A L I N G [ 22 ]
5 5 Press . “ Store Number “ is displayed.
The cursor flashes indicating that the display is ready
for the number to be entered.
6 6 Use the number keypad to enter the phone number.
The phone number cannot exceed 20 digits.
• Use to enter pause in the dialing sequence.
The display shows a “ P “. Each pause counts as one
digit and represents a two second delay of time between
the digits.
• Use to delete digits as needed.
7 7 Press . The handset beeps and displays the
conf irmation screen. Memor y storage is complete.
For example, if you store a name and number into
memor y location number 07, the display shows
“
Memory07 Stored “ .
Af ter about 2 seconds, “ Memory Store “ is displayed.
8 8 Press to return to standby mode.
delete/int com
• The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
• The 10 memory locations
in the base are
independent locations
from the handset.
Store Number
8178583300
Memory07 Stored
Memory Store
07 UNIDEN CORP
08
W Wiitth h tth hee B Baassee
1 1 Press . The ssttaattu uss LED blinks.
2 2 Dial the number you wish to store.
(The phone number cannot exceed 20 digits.)
3 3 Press . Enter the memor y location number (0-9)
on the keypad. The ssttaattu uss LED goes out.
A conf irmation tone sounds and the number is stored.
Store Number
• The 10 memory locations
are represented by the
numbers 0-9 on the
keypad. If you store a
number in one of
locations, then attempt
to store a different
number in the same
location later, the new
number will overwrite
the previous one.
TRU3485_new 8/7/00 5:22 PM Page 22