Uniden DRX332 - Manual (Page 9)

9
2. While on the call, carry the handset away from the base
towards the general area where you want to put the
charger.
3. Watch the signal strength icon on the handset. Make a note
where the icon drops from 4 bars to 3 bars.
4. Continue walking away from the base. Make a note where
the signal strength icon drops from 3 bars to 2 or if you
start to hear noise on the line (which indicates the signal is
getting weaker).
5. Place the charger anywhere inside the range where the
signal strength icon showed 3 bars and the handset had a
clear signal with no noise.
Testi ng the locati on
Connect the charger's AC adapter and make sure the
LINK
light
comes on steadily. If the light flashes, the MULTIRANGE charger
is not getting a good signal from the base. The charger may be
too far away from the base, there may be interference from
electronic devices, or the signal might be blocked by thick walls
or metal objects. Try moving the charger to another location.