Uniden DRX332 - Manual (Page 4)

4
Registering the Handset
#
Registering the handset is a separate process from registering the
MULTIRANGE
TM
charger. You can use the handset normally even
if the charger is not registered.
#
The accessory handset will not work until you register it to a
base!
Compati ble Bases
This handset is designed for use with Uniden's DECT3380
base. Other Uniden DECT6.0 bases might be compatible with
this handset. For up-to-date list of compatible bases for this
handset, see our website.
Register the handset
In most cases, all you need to do is place the handset in the
base. The display should say Handset Registering.
If the handset doesn't fit in the base cradle or if the base has a
corded handset, follow the steps below:
1. On the base, press and hold
FIND
when the phone is in
standby (about 5 seconds).
2. On the handset, press and hold
POUND (#)
until the display
says Handset Registering (about 2 seconds).
#
After about 30 seconds, the handset display should say
Registration Complete.