Uniden T H E E X S 9 9 6 6 - Manual (Page 21)

Use the redial/p key to recall the last 3
numbers dialed from the handset or the last
number dialed when using the base. The
redialed number can be up to 32 digits long.
To redial from the handset:
Press redial repeatedly to display the
number you want to dial, then press line 1.
If you press line 1 before redial, only the
last number dialed can be accessed for redial.
To redial from the base:
Press line 1 , then press redial/p .
If any key is pressed before redialing, the
last number will not redial.
To place line 1 on hold at the
handset, press hold .
The following screen appears:
To pick up the call that is holding,
press line 1 on the base or handset.
(Hold)
Line 1
Use either the keypad on the handset or the keypad on the base.
To place line 1 on hold at the
base, press hold . The line 1 LED turns
from green to red.
PLACING A CALL ON HOLD
USING REDIAL
19
The handset and the base
have independent redial
memories.