Uniden DCT736 - Manual (Page 43)

43
Troubleshooting
Resetting.the.Handset
You.may.need.to.reset.your.handset.in.the.following.instances:.
You.lose.a.handset.and.purchase.a.new.one..
When.you.try.and.register.to.your.existing.base,.you.see.REGISTRATION.FAILED.on.the.menu.display..
You.are.unable.to.register.any.handsets.to.the.base..
You.had.a.base.which.needed.to.be.exchanged.by.the.manufacturer.
When.you.register.your.existing.handsets.to.the.base,.and.the.handset.IDs.do.not.match..(For.example,.the.
handset.registers.as.Handset.#4,.but.you.only.have.two.handsets.)
When.you.are.instructed.to.by.the.one.of.the.manufacturer’s.call.center.representatives..
To.reset.the.handset,.do.the.following:.
Press.and.hold. [ ].and.[#/ ].for.at.least.5.seconds.until.the.SYSTEM.RESET.menu.appears...
Select.DEREGISTER.HS.submenu..WHICH.HANDSET?.appears.
Move.the.cursor.to.select.the.handset.ID.to.be.deregistered.from.the.list,.and.then.press.
..
DEREGISTER.HS.appears.
The phone will ask you to confirm the deregistration. Move the cursor to YES, and then press
..
You will hear a confirmation tone. the handset will delete its own base information without trying to contact the
base..When.the.base.information.is.deleted,.the.handset.displays.MODELS.VARY!.CHARGE.HANDSET.ON.
THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL.
If.the.handset.cannot.contact.the.base,.it.displays.UNAVAILABLE..Make.sure.the.handset.is.in.range.of.the.base.
and.the.base.is.connected.to.power.
Note:.It.is.also.possible.to.reset.the.handset.back.to.its.original.factory.settings..All.changes.including.phone-
book.entries.and.Caller.ID.information.will.be.erased..For.more.information.on.resetting.the.handset.back.to.
factory.settings.and.when.you.need.to.do.this,.see.www.uniden.com.or.call.our.Customer.Service.Hotline.(For.
contact.information,.see.the.back.page).
•
•
•
•
•
•
1.
.
3.