Uniden XS210 - Manual (Page 7)

6
To locate the handset (while it’s off the base), press on the base.
The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key,
on the
base or return the handset to the base.
PAGE
Ringer tone
When the phone is in standby mode, pressing the
key on the
handset selects the handset ringer tone. "Press to listen to the first
tone. While the first tone is still ringing, press again to hear the
second tone. Repeat process to toggle between the two tone options."
Earpiece volume
The handset earpiece volume settings (Low, Medium and High) can only be
adjusted during a call. Press the
key repeatedly to select Low,
Medium and High. When you hang up, the phone keeps the last volume
setting selected.
Ringer mute
The
key can be used to temporarily mute the ringer tone. When the
handset is off the base and the phone is ringing, press the key and
the ringer tone will be temporarily silenced. The call will not be answered,
and the ringer tone will return to normal starting with the next incoming
call.
ADJUSTING THE RINGER AND EARPIECE VOLUME
During a call, as you begin to move your handset too far from your base
unit, noise increases. If you pass the range limits of the base unit, your call
will terminate within 1 minute.
TRAVELING OUT-OF-RANGE
If you encounter interference while using your phone, you can manually
change the phone’s channel for clear operation. This function works only
when the phone is in use.
Press .
The talk/batt low LED flashes, indicating the phone is
changing to another channel. There are twenty channels to choose from.
SELECTING A DIFFERENT CHANNEL
XS210.Qx 10/6/03 5:27 PM Page 7