Uniden TRU 3465 - Manual (Page 46)

SSu ug gg geessttiio on n
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Make sure the handset is properly seated in the base unit.
• Make sure the charging contacts on the handset and base unit are clean.
• Press
during a call to help eliminate background noise.
• Make sure that the base unit antenna is in a ver tical position.
• Move the handset and or base unit to a dif ferent location away from metal
objects or appliances and tr y again.
• Make sure that you are not too far from the base.
• Check both ends of the base unit telephone line cord.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Reset the digital security code (See page 40).
• Make sure
is pressed.
• The batter y pack may be weak. Charge the batter y on the base unit for
more than 15 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Reset the digital security code (See page 40).
talk
[ 44 ]
SSyym mp ptto om m
The ssttaattu uss LED won´t light
when the handset is
placed in the base unit.
The audio sounds weak
and/or scratchy.
Can´t make or receive
calls.
The handset doesn´t ring
or receive a page.
A D D I T I O N A L I N F O R M AT I O N
Troubleshooting
If your phone is not per forming to your expectations, please tr y these simple steps f irst.
TRU3465 newstyle 8/2/00 11:25 AM Page 44