Uniden TRU 3465 - Manual (Page 29)

[ 27 ] M E M O R Y D I A L I N G
MEMOR
Y DIALING
Erasing a Stored Name and Phone Number
1 1 Press and hold until “ Memory Store “
is displayed.
2 2 Press and or enter a two-digit number (01 - 20)
to select the memor y location you would like to edit.
3 3 Press .
The following screen appears with the memor y location
number that you have selected in the display.
4 4 Press to move the pointer down to “ Delete
Memory “ command line.
ª
ª •
To edit the numbers that
you have stored in the
base, simply overwrite the
existing number. Refer to
“ Storing Phone Numbers
and Names; With the
Base“ on page 23.
Memory Store
01 UNIDEN CORP
02 JOHN DOE
Edit Memory02
Delete Memory02
Go Back
Edit Memory02
Delete Memory02
Go Back
7 7 Use the number keypad, or to edit the phone number.
The phone number cannot exceed 20 digits. (See page 22.)
If you don´t want to change the phone number, skip this step.
8 8 Press . The handset beeps and displays the
conf irmation screen. The memor y storage is complete.
For example, if you store a name and number into
memor y location number 01, the display shows
“
Memory01 Stored “ . A f ter about 2 seconds,
“ Memory Store “ is displayed.
9 9 Press to return to standby mode.
delete/int com
Memory01 Stored
Memory Store
01 UNIDEN CORP
02 JOHN DOE
TRU3465 newstyle 8/2/00 11:24 AM Page 27