Uniden TRU 3465 - Manual (Page 42)

[ 40 ] A D D I T I O N A L I N F O R M AT I O N
Changing the Digital Security Code
The digital security code is an identif ication code used to connect the
handset and the base unit. Normally, setting the code is not necessar y.
The f irst time you charge your handset, the security code is automatically set.
(See page 6.)
In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code.
1 1 Remove the handset from the base unit.
Press on the base.
2 2 While the handset is emitting the paging
sound, replace the handset to the base unit.
The paging tone stops.
Leave the handset on the base for more than
3 seconds. A random, new security code is set.
intercom
If the handset battery pack
is completely discharged or
the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time the
battery pack is charged.
TRU3465 newstyle 8/2/00 11:25 AM Page 40