Universal Remote Control (URS) MX-800 - Manual (Page 6)

Turn On Your Entire System
Power on/off your entire system
with the MAIN Menu by following
these steps:
1. Touch the MAIN button to make
sure that you are on the MAIN Menu.
It doesn’t matter which page of the
MAIN Menu is displayed.
2. Point the the remote control at the
system (usually a repeating sensor
near the screen).
3. Touch the On or Off button as
desired. Wait until all components are
correctly powered on or off. Turning on
the system may take ten to twenty
seconds.
4. If one component does not turn
on/off, simply touch the button again.
TIP – The remote control is still
issuing commands while the
indicator flashes.
3