Uniden UH-040XR - Manual (Page 10)

SELECTING CHANNEL
Press [▲] or [▼] to select the desired channel.
Note: If you press and hold the [▲] or [▼],
channel numbers will scroll rapidly.
TO TRANSMIT AND RECEIVE
The UH-040XR uses the 40 UHF-CB Channels. For your reference a list of the
available channels and corresponding frequencies is printed at the end of this
manual.
1. The maximum RF transmit power of UH-040XR is 500 mWatts.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press and
hold the [PTT] to transmit.
appears on the LCD.
Hold the radio with microphone approximately two inches in front of your mouth
with the antenna at approximately 45˚ angle away from your head. Speak in a clear,
normal conversational voice.
4. When you have finished speaking, release the [PTT] and listen for a response.
TX indicator then disappears on the LCD.
The display shows when a
transmission is being received by
your radio.
DUP
SCAN
PTT
Switch
OS/GS
MEM
DUP
SCAN
7