Uniden DECT1805 - Manual (Page 13)

SWITCHING THE HANDSET ON AND OFF
To turn the handset on:
Press until the display is visible.
The Main Base number is shown on the left and the handset number shown on the right.
(These numbers may differ from those shown below.)
To turn the handset off:
Press and hold until the display goes blank.
(If the handset is off when it is returned to the Base Station cradle, it will automatically
switch back on).
LOCKING AND UNLOCKING THE KEYPAD
Locking the Handset keypad prevents accidental key presses causing dialling or
programming. The only activities that can be performed whilst the keypad is locked are
receipt of an incoming call and unlocking the keypad.
Press followed by to lock the keypad.
The display will appear as below.
Repeat to unlock the keypad.
CALL TIMER
The call duration will be displayed, 10 seconds after the call has started.
BASIC
ACTIVITIES
9
LOC
- -11- - 11
Dect 1802 Qk 7/19/02 3:45 PM Page 13