Univex 2010 Armada User Manual

Page 12

DISC/AUX BUTTON

Press the DISC/AUX button to play a CD loaded into the CD player. Press the
DISC/AUX button again to play a compatible device such as an MP3 player when it is
plugged into the auxiliary jacks located below the climate controls (cable not included).
Press the DISC/AUX button again to play a DVD loaded into the DVD player (if so
equipped). Press the DISC/AUX button again to play the CompactFlash

ா Drive, if a

card is in the drive.

NOTE: You may need to adjust the volume on any compatible device plugged into the
auxiliary jack to find the most desired sound level of the audio system.

AM·FM/SAT BUTTON

Pressing the AM·FM/SAT button will change the band to either FM, AM or XM

ா radio

stations.

STATION SELECT BUTTONS

To store a radio station in a preset, you must first select the FM, AM or SAT (if so
equipped) radio band by pressing the AM·FM/SAT button and tuning to the desired
FM, AM or XM

ா station. Then press and hold the desired station select button for at least

2 seconds. When the preset indicator illuminates, a beep will sound, indicating
memorization is complete. To retrieve a previously set station, select the memory bank
where the preset was set, then press the corresponding station select button.

EJECT BUTTON

Press the

button; the CD will eject.

SCAN·RPT BUTTON

Ⅲ Press the SCAN·RPT button while listening to a radio station (FM, AM or XMா). The

radio will stop for 5 seconds at each station that has significant signal strength.
Pressing the SCAN·RPT button again during this 5-second period will stop scan
tuning and the radio will remain tuned to that station. If the SCAN·RPT button is not
pressed within 5 seconds, scan tuning moves to the next station.

Ⅲ To change the play pattern of the CD, CompactFlashா (if so equipped) or Music Box

Hard-Disk Drive Audio System (if so equipped), press the SCAN·RPT button.

SEEK/CAT AND TRACK BUTTONS

Ⅲ To scan quickly through each broadcasting station, press the SEEK/CAT or the

TRACK button.

Ⅲ To skip from one track to another on a CD, press the SEEK/CAT or the TRACK

button. Each time the button is pressed, the CD will advance or skip back one track.

Ⅲ When the SEEK/CAT or the TRACK button is pressed and held while a CD is

playing, it will rewind or fast forward. When the button is released, the CD will play at
normal speed.