Uniden WDECT 3315 - Manual (Page 46)

[ 42 ]
Call Transfer Feature
1) During a call, press /transfer/int’com.
2) Select a handset to transfer the call within 10
seconds. (Refer to step 2 in the intercom section
on page 41).
The call will automatically be placed on hold, and
an intercom tone sounds.
To cancel the transfer, press or speaker on the initiating
handset.
3) On the receiving handset, to answer the page, press or /
transfer/int’com. If you turn AutoTalk on, pick up the handset from the cradle.
If Anykey Answer is On, press any number key, tone , or . The
intercom mode is activated, but the caller is still on hold.
4) To transfer the call, press on the initiating handset, and press
on the receiving handset.
rEplaCing ThE baSE
If the base unit is replaced with a different base from this same series of cordless
models, you must clear handset (s) and base identification numbers. To do this,
select “System Reset” from handsets display menu option list (see page 17 for
guidance).
For model number
verification, visit
our website www.
uniden.com.au or
www.uniden.co.nz
Hold,to transfer
Handset #2
Handset #3