Universal Remote Control (URS) DMS-AV TSP2000 - Manual (Page 20)

Page 21
DMS-AV H
OME
T
HEATER
A
MPLIFIER
Video Outputs - Hardware Connections
Video Output Connection - HDMI
The HDMI output connection on the receiver carries high-definition video to
your television or monitor. To connect an HDMI video output from the DMS-
AV, connect the HDMI cable to the HDMI output on the DMS-AV. Then
connect the other end of the cable into the corresponding HDMI input on your
television or monitor. Shown below is the HDMI output on the DMS-AV going
to the HDMI input on a monitor.
Video Output Connection - Component Video
The component video output connection on the receiver carries high-definition
or standard definition component video to your television or monitor. HDMI
video and composite video are not routed to the component video output of
the DMS-AV. On-screen display is not viewable from the component video
output of the DMS-AV. To connect a component video output from the DMS-
AV, connect the three RCA component video cables to the corresponding
component video outputs on the DMS-AV. Then connect the other ends of the
cables into the corresponding component video inputs on your television or
monitor. Shown below is the component video output on the DMS-AV going to
the component video input on a monitor.
Component output connection to input of monitor
HDMI input connection to monitor