Getting to know your phone, Cell, English – Uniden D3280 User Manual

Page 5: Using the d3280 with four bluetooth phones, Parts of the base, Dial the number you want to call, then press, Key (icon) what it does

English -

Dial the number you want to call, then press

Cell

on the handset. You may not

hear a dial tone or ringing, but the handset display says Talk.
Make sure the call connects and you can hear clearly. (When you’re finished,

press

eNd

to hang up.)

The D3280 remembers the pairing information for your cellular; if it loses

connection with your phone for any reason (e.g., the cell phone travels out of

range, runs out of charge, etc.), the D3280 can automatically reconnect the

next time your phone becomes available.

Using the D3280 with four Bluetooth phones

The D3280 can save the pairing information for four different Bluetooth phones,

but it can only use one cellular line at any given time. For example, if you pair the
D3280 to four Bluetooth phones, when you press

Cell

on the handset, the D3280

asks which phone you want to connect to.
If you are using the D3280 to talk on one Bluetooth phone, the D3280 will not

ring if a call comes in on another phone.
You can set a different ring tone for each paired cell phone (see page 8).
To pair another Bluetooth phone, just repeat the pairing procedure with the new

phone. (If the paired phones interfere when you’re pairing the new one, just turn

off Bluetooth on any paired phones until you finish pairing the the new one.)

GETTING TO KNOW YOUR PHONE

Parts of the Base

Key (icon)

What it does

delete (

)

When listening to messages: delete the current message.
In standby: delete all messages.




Find Handset ( )

In standby: page all handsets.



Rev (

)

In the first 2 seconds of a message: go to the previous message.
Anytime after that: restart the current message.




♦

♦
♦

REV

DOWN

FWD

FIND

HANDSET

Charging

contacts

DELETE

PLAY/STOP

ANSWER

ON/OFF

Message

counter

Bluetooth

device

number