Uniden D3280 - Manual (Page 21)

English - 1
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone. Before you
can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select Ans. Setup , then select Security
Code . Use the number keypad to enter a two-digit security code ( 01 to 99 ). Press
menu/select when you’re finished.
Remember to make a note of your new security code!
Dialing In to Your System
Call your phone number & wait until the system answers. (If the system is turned
off, it answers after 10 rings & sounds a series of beeps.)
During the greeting or beeps, press
0 and immediately enter your security code.
If you enter it incorrectly 3 times, the system hangs up and returns to standby.
The system announces the time, the number of messages in memory, and a help
prompt. It beeps to let you know it's waiting for a command.
When you hear beeping, enter a 2-digit command from the chart.
If you don't press
any keys for 15
seconds, the
system hangs
up and return to
standby.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you need help,
call our Customer Care Line listed on the front cover.
General problems Possible solutions
No handsets can make or
receive calls.
Check the telephone cord connection.
Disconnect the base AC adapter for a few minutes; then
reconnect it.


A handset can’t make or
receive calls.
Move the handset closer to the base. 
A handset can make calls,
but it won’t ring.
Make sure the ringer is turned on.
Make sure Silent Mode is turned off (see p. 15). 

A handset is not working.
Charge the battery for 15-20 hours.
Check the battery connection. 


1.
2.
3.
4.

01 Repeat message 05 Stop playback
02 Play message 06 Turn the system on
03 Skip message 09 Turn the system off
04 Delete message 10 Hear help prompts
01 Repeat message 05 Stop playback
02 Play message 06 Turn the system on
03 Skip message 09 Turn the system off
04 Delete message 10 Hear help prompts