Uniden UH-048XR - Manual (Page 13)

Press [
▲
] or [
▼
] to
select the additional
channel you wish to
monitor. Press
[ ] to
confirm your selection and to activate dual-watch
mode. Otherwise, the selected channel is automatically
accepted if no key is pressed after 5 Secs.
Note: Pressing [Function] will stop Dual-Watch Mode
operation.
SCANNING
This feature allows you to scan for an active channel
and communicate with the party transmitting.
1. Press [Function] button until appears in the
large display and the auto channel scan icon
[
] flashes.
2. Press [▲] or [▼] to
select up or down.
Note: [▲] means scanning
goes from lower to
higher channel, [▼] means scanning goes from higher
to lower channel.
3. Press [ ] to confirm your selection and to
activate the scan mode. Otherwise the status
selected is automatically accepted if no key is
pressed after 5 Secs.
10